Skip to main content
Title Sort descending Pub Year Author SearchLink
Body mass index, smoking, and alcohol and risks of Barrett's esophagus and esophageal adenocarcinoma: a UK prospective cohort study 2014 Norfolk and Norwich University Hospital NHS Trust, Colney Lane, Norwich, NR4 7UY, UK, max.yates@nnuh.nhs.uk.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Digestive diseases and sciences
Periodical, Abbrev.
Dig.Dis.Sci.
Pub Date Free Form
Jul
Volume
59
Issue
7
Start Page
1552
Other Pages
1559
Notes
LR: 20151119; GR: 14136/Cancer Research UK/United Kingdom; GR: C864/A14136/Cancer Research UK/United Kingdom; GR: G1000143/Medical Research Council/United Kingdom; JID: 7902782; Adenocarcinoma Of Esophagus; OID: NLM: PMC4067535; 2013/08/20 [received]; 201
Place of Publication
United States
ISSN/ISBN
1573-2568; 0163-2116
Accession Number
PMID: 24500448
Language
eng
SubFile
Journal Article; Research Support, Non-U.S. Gov't; AIM; IM
DOI
10.1007/s10620-013-3024-z [doi]
Output Language
Unknown(0)
PMID
24500448
Abstract
BACKGROUND: The timing of the risk factors cigarette smoking, alcohol and obesity in the development of Barrett's esophagus (BE) and esophageal adenocarcinoma (EAC) is unclear. AIMS: To investigate these exposures in the aetiology of BE and EAC in the same population. METHODS: The cohort included 24,068 men and women, aged 39-79 years, recruited between 1993 and 1997 into the prospective EPIC-Norfolk Study who provided information on anthropometry, smoking and alcohol intake. The cohort was monitored until December 2008 and incident cases identified. RESULTS: One hundred and four participants were diagnosed with BE and 66 with EAC. A body mass index (BMI) above 23 kg/m(2) was associated with a greater risk of BE [BMI >/=23 vs. 18.5 to 23 kg/m(2)). Neither smoking nor alcohol intake were associated with risk for BE. For EAC, all BMI categories were associated with risk, although statistically significant for only the highest (BMI >35 vs. BMI 18.5 to 23 kg/m(2)). There was an inverse association with >/=7 units alcohol/week (HR 0.51, 95 % CI 0.29-0.88) and with wine (HR 0.49, 95 % CI 0.23-1.04, p = 0.06, drinkers vs. non-drinkers). CONCLUSIONS: Obesity may be involved early in carcinogenesis and the association with EAC and wine should be explored. The data have implications for aetiological investigations and prevention strategies.
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Yates,M., Cheong,E., Luben,R., Igali,L., Fitzgerald,R., Khaw,K.T., Hart,A.
Original/Translated Title
URL
Date of Electronic
20140206
PMCID
PMC4067535
Editors
Bond strength of adhesive systems to Er,Cr:YSGG laser-irradiated dentin 2011 Department of Restorative Dentistry, Piracicaba Dental School, Campinas State University, SP, Brazil.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Photomedicine and laser surgery
Periodical, Abbrev.
Photomed.Laser Surg.
Pub Date Free Form
Nov
Volume
29
Issue
11
Start Page
747
Other Pages
752
Notes
LR: 20141120; JID: 101222340; 0 (Dentin-Bonding Agents); 2011/09/16 [aheadofprint]; ppublish
Place of Publication
United States
ISSN/ISBN
1557-8550; 1549-5418
Accession Number
PMID: 21923283
Language
eng
SubFile
Journal Article; Research Support, Non-U.S. Gov't; IM
DOI
10.1089/pho.2010.2983 [doi]
Output Language
Unknown(0)
PMID
21923283
Abstract
OBJECTIVE: The purpose of this study was to evaluate the effects of Er,Cr:YSGG laser irradiation and different adhesive procedures on bond strength of two bonding agents to dentin. BACKGROUND DATA: Studies have shown that laser-irradiated dentinal tissue yields lower bond strengths than does nonirradiated dentin. In this study, different treatment methods of laser irradiating dentin were studied to enhance the bond strength of bonding agents to nonirradiated dentin. METHODS: Third molars were wet ground with SiC until the occlusal flat dentin surface was exposed, and the teeth were randomly assigned to six groups (n=5). A two-step self-etching primer (Clearfil SE Bond, G1) and a two-step etch-and-rinse adhesive (Single Bond Plus, G2) were applied to the nonirradiated dentin surface according to manufacturer's instructions, as control groups. In G3 and G4, the same adhesives were applied after Er,Cr:YSGG laser irradiation, whereas in G5 and G6 adhesives were applied after Er,Cr:YSGG laser irradiation, phosphoric acid etching, and NaOCl deproteinization of etched dentin. The Er,Cr:YSGG laser worked at 2.78??m and the repetition rate was fixed at 20?Hz. Composite blocks were built on bonded surfaces and the teeth were stored for 24?h at 37?C. Restored teeth were vertically and serially sectioned to obtain bonded specimens for the bond strength test. Data were analyzed by two-way ANOVA and Tukey test (?=5%). RESULTS: Laser irradiation reduced bond strengths for the two adhesives, regardless of acid etching and deproteinization of dentin post-irradiation (p
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Carvalho,A.O., Reis,A.F., de Oliveira,M.T., de Freitas,P.C., Aranha,A.C., Eduardo Cde,P., Giannini,M.
Original/Translated Title
URL
Date of Electronic
20110916
PMCID
Editors
Bond strength of composite resin to enamel and dentin prepared with Er,Cr:YSGG laser 2015 Advanced Operative Dentistry, The Nippon Dental University Graduate School of Life Dentistry at Niigata.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Dental materials journal
Periodical, Abbrev.
Dent.Mater.J.
Pub Date Free Form
Volume
34
Issue
6
Start Page
863
Other Pages
871
Notes
JID: 8309299; ppublish
Place of Publication
Japan
ISSN/ISBN
1881-1361; 0287-4547
Accession Number
PMID: 26632236
Language
eng
SubFile
Journal Article; Research Support, Non-U.S. Gov't; D
DOI
10.4012/dmj.2015-053 [doi]
Output Language
Unknown(0)
PMID
26632236
Abstract
We aimed to examine the effect of various adhesive systems on the bond strength of composite resin to enamel or dentin prepared with erbium, chromium: yttrium scandium gallium garnet (Er,Cr:YSGG) laser. Each laser-cut enamel or dentin surface was treated with a bonding agent (SBB, Group 1); self-etching primer (SBP) and SBB (Group 2 and control); phosphoric-acid (KET), SBP and SBB (Group 3); KET, sodium-hypochlorite (ADG), SBP and SBB (Group 4); all-in-one adhesive (TSB, Group 5); or KET, ADG and TSB (Group 6). The control group was only polished with wet silicon carbide papers. The enamel shear bond strength of Group 5 was significantly lower than that of other groups (p
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Takada,M., Shinkai,K., Kato,C., Suzuki,M.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Bond strengths of porcelain laminate veneers to tooth surfaces prepared with acid and Er,Cr:YSGG laser etching 2003 Department of Prosthodontics, Selcuk University, Konya, Turkey. asli_u@hotmail.com
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The Journal of prosthetic dentistry
Periodical, Abbrev.
J.Prosthet.Dent.
Pub Date Free Form
Jul
Volume
90
Issue
1
Start Page
24
Other Pages
30
Notes
LR: 20121115; JID: 0376364; 0 (Aluminum Silicates); 0 (IPS-Empress ceramic); 0 (Maleates); 0 (Phosphoric Acids); 0 (Resin Cements); 12001-21-7 (Dental Porcelain); 179240-22-3 (Variolink); 91XW058U2C (maleic acid); ppublish
Place of Publication
United States
ISSN/ISBN
0022-3913; 0022-3913
Accession Number
PMID: 12869971
Language
eng
SubFile
Journal Article; D; IM
DOI
10.1016/S002239130300235X [doi]
Output Language
Unknown(0)
PMID
12869971
Abstract
STATEMENT OF PROBLEM: The erbium, chromium: yttrium, scandium, gallium, garnet (Er,Cr:YSGG) hydrokinetic laser system has been successful in the ablation of dental tissues. It has been reported that this system is also useful for preparing tooth surfaces for adhesion, but results to date have been controversial. PURPOSE: This in vitro study evaluated the bond strengths of porcelain laminate veneers to tooth surfaces after etching with acid and Er,Cr:YSGG laser conditioning. Material and method Forty extracted caries- and restoration-free human maxillary central incisors were used. The teeth were sectioned 2 mm below the cementoenamel junction. The crowns were embedded in autopolymerizing acrylic resin with the labial surfaces facing up. The labial surfaces were prepared with.05 mm reduction to receive porcelain veneers. The teeth were divided into 4 groups of 10 specimens. Thirty specimens received 1 of the following surface treatments before the bonding of IPS Empress 2 laminate veneers: (1) laser radiation from an Er,Cr:YSGG laser unit; (2) 37% orthophosphoric acid; and (3) 10% maleic acid. Ten specimens received no surface treatment and served as the control group. The veneers were bonded with dual-polymerizing resin, Variolink II. One microtensile specimen from each of the cervical and incisal thirds measuring 1.2 x 1.2 mm was prepared with a slow-speed diamond saw sectioning machine with a diamond-rim blade. These specimens were attached to opposing arms of the microtensile testing device with cyanoacrylate adhesive and fractured under tension at a crosshead speed of 1 mm/min, and the maximum load at fracture (Kg) was recorded. The data were analyzed with a 2-way analysis of variance and Tukey HSD tests (alpha=.05). RESULTS: No statistically significant differences were found among the bond strengths of veneers bonded to tooth surfaces etched with Er,Cr:YSGG laser (12.1 +/- 4.4 MPa), 37% orthophosphoric acid (13 +/- 6.5 MPa), and 10% maleic acid (10.6 +/- 5.6 MPa). The control group demonstrated the lowest bond strength values in all test groups. Statistically significant differences were found between the bond strengths of cervical and incisal sections (P<.001). CONCLUSION: In vitro microtensile bond strengths of porcelain laminate veneers bonded to tooth surfaces that were laser-etched showed results similar to orthophosphoric acid or maleic acid etched tooth surfaces.
Descriptors
Acid Etching, Dental, Aluminum Silicates/chemistry, Analysis of Variance, Dental Bonding, Dental Enamel/ultrastructure, Dental Porcelain/chemistry, Dental Veneers, Humans, Lasers, Maleates/chemistry, Materials Testing, Microscopy, Electron, Scanning, Phosphoric Acids/chemistry, Resin Cements/chemistry, Stress, Mechanical, Surface Properties, Tensile Strength, Tooth Preparation/methods
Links
Book Title
Database
Publisher
Data Source
Authors
Usumez,A., Aykent,F.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Bonding of resin composite to tooth structure of uremic patients receiving hemodialysis: shear bond strength and acid-etch patterns 2008 Conservative Dentistry Department, Faculty of Dentistry, Mansoura University, Mansoura, Egypt. dr_salahhasab@yahoo.com
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The journal of adhesive dentistry
Periodical, Abbrev.
J.Adhes.Dent.
Pub Date Free Form
Oct
Volume
10
Issue
5
Start Page
335
Other Pages
338
Notes
LR: 20121115; JID: 100888552; 0 (Carbon Compounds, Inorganic); 0 (Composite Resins); 0 (Dental Materials); 0 (Dentin-Bonding Agents); 0 (Resin Cements); 0 (Silicon Compounds); 0 (Syntac dentine adhesive); 0 (Tetric ceram); WXQ6E537EW (silicon carbide); pp
Place of Publication
England
ISSN/ISBN
1461-5185; 1461-5185
Accession Number
PMID: 19058677
Language
eng
SubFile
Comparative Study; Journal Article; D
DOI
Output Language
Unknown(0)
PMID
19058677
Abstract
PURPOSE: To investigate the influence of uremia on the shear bond strength (SBS) of composite resin to enamel and dentin substrates with assessment of the micromorphological pattern of etched enamel and dentin surfaces using atomic force microscopy (AFM). MATERIALS AND METHODS: A total of 44 natural molars was collected from healthy individuals (n=22 molars) and uremic patients (n=22 molars). Each set of teeth was then divided into 2 equal subsets (n=11 molars) relative to the bonding substrate to be tested. In each subset, the surfaces of 7 molars were flattened and polished up to 2000-grit roughness using wet silicon carbide (SIC) abrasive papers. A three-step adhesive was used to bond Tetric Ceram composite buildups to the prepared tooth surfaces. All specimens were thermocycled before they were stressed in shear using a universal testing machine. Fractured specimens were stereomicroscopically examined to detect the mode of bond failure. In the remaining 4 molars, enamel and dentin specimens were prepared for AFM examination to assess the micromorphological patterns of acid-etched surfaces. RESULTS: The mean bond strength values in MPa to enamel (22.40 +/- 4.30) and dentin (17.97 +/- 4.65) of teeth of healthy individuals were significantly different (p < 0.001) from those to enamel (12.40 +/- 2.81) and dentin (7.83 +/- 2.05) of teeth of uremic patients. Most of the tested enamel specimens showed a mixed type of bond failure, but the adhesive type was predominant with dentin specimens. AFM examinations revealed a shallow etching pattern for uremic enamel and dentin specimens compared to those of healthy individuals. The mean roughness average (Ra) values after etching of healthy enamel (238.0 +/- 4.65) and dentin (267.0 +/- 4.79) were significantly different (p < 0.001) from those to etched uremic enamel (111.0 +/- 5.24) and dentin (143.0 +/- 2.16). CONCLUSION: Uremia adversely affects bonding of composite resin to enamel and dentin and confers an altered micromorphological etching pattern.
Descriptors
Acid Etching, Dental, Carbon Compounds, Inorganic/chemistry, Composite Resins/chemistry, Dental Bonding, Dental Enamel/ultrastructure, Dental Materials/chemistry, Dentin/ultrastructure, Dentin-Bonding Agents/chemistry, Humans, Materials Testing, Microscopy, Atomic Force, Molar/ultrastructure, Renal Dialysis, Resin Cements/chemistry, Shear Strength, Silicon Compounds/chemistry, Stress, Mechanical, Surface Properties, Tooth Preparation/methods, Uremia/pathology/therapy
Links
Book Title
Database
Publisher
Data Source
Authors
Mahmoud,S. H., Abdel kader Sobh,M., Zaher,A. R., Ghazy,M. H., Abdelaziz,K. M.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Bonding orthodontic brackets to porcelain using different adhesives/enamel conditioners: a comparative study 2005 Department of Orthodontics, College of Dentistry, University of Iowa, 220 Dental Science S, Iowa City, IA 52242-1001, USA Linda-keller@uiowa.edu
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
World journal of orthodontics
Periodical, Abbrev.
World J.Orthod.
Pub Date Free Form
Spring
Volume
6
Issue
1
Start Page
17
Other Pages
24
Notes
LR: 20131121; JID: 100959981; 0 (Composite Resins); 0 (Cyanoacrylates); 0 (Phosphoric Acids); 0 (Resin Cements); 0 (Silanes); 0 (Smartbond); 12001-21-7 (Dental Porcelain); 135669-49-7 (Transbond); 454I75YXY0 (Bisphenol A-Glycidyl Methacrylate); RGL5YE86CZ
Place of Publication
United States
ISSN/ISBN
1530-5678; 1530-5678
Accession Number
PMID: 15794038
Language
eng
SubFile
Clinical Trial; Comparative Study; Journal Article; Randomized Controlled Trial; D; IM
DOI
Output Language
Unknown(0)
PMID
15794038
Abstract
AIM: To evaluate the use of new adhesive/primer materials, including an experimental self-etch primer and a cyanocrylate adhesive, to enhance the shear strength of orthodontic brackets bonded to porcelain surfaces. MATERIAL AND METHODS: Sixty porcelain maxillary central incisor teeth were used. The teeth were randomly divided into four groups: group 1, teeth were etched with 37% phosphoric acid and the brackets were bonded with a composite adhesive; group 2, teeth were microetched, hydrofluoric acid and silane applied, and then the brackets were bonded with a composite adhesive; group 3, an acid-etch primer was used, then the brackets were bonded with the same composite adhesive as in the first 2 groups; group 4, teeth were etched with 35% phosphoric acid and the brackets were bonded with the cyanoacrylate adhesive. RESULTS: The analysis of variance comparing the groups tested (F = 9.446) indicated that there was a significant difference between the 4 groups. The cyanoacrylate adhesive had the lowest shear bond strength (mean = 1.7 +/- 2.1 MPa), followed by the conventional bonding using a 37% phosphoric acid etch and composite (mean = 2.1 +/- 1.2 MPa). The use of Transbond after microetching, with the application of hydrofluoric acid and silane, provided the highest shear bond strength (mean = 5.5 +/- 2.7 MPa). Transbond used with the acid etch-primer had a lower bond strength (mean = 3.8 +/- 2.5 MPa), but was not significantly different from the microetch/hydrofluoric acid/silane group. CONCLUSION: The results indicated that the use of a phosphoric acid etch with either a cyanoacrylate or composite adhesive to bond orthodontic brackets to porcelain surfaces produced significantly lower shear bond strength. Self-etch primers produced higher but less consistent shear bond strength for bonding orthodontic brackets. The most reliable bonding procedure to porcelain surfaces is through microetching with the use of hydrofluoric acid and a silane coupler before bonding, but this also produces the greatest damage to the porcelain surface.
Descriptors
Acid Etching, Dental/methods, Air Abrasion, Dental, Bisphenol A-Glycidyl Methacrylate/chemistry, Composite Resins/chemistry, Cyanoacrylates/chemistry, Dental Bonding, Dental Enamel, Dental Porcelain/chemistry, Humans, Hydrofluoric Acid/chemistry, Materials Testing, Orthodontic Brackets, Phosphoric Acids/chemistry, Resin Cements/chemistry, Shear Strength, Silanes/chemistry, Stress, Mechanical, Surface Properties
Links
Book Title
Database
Publisher
Data Source
Authors
Bishara,S. E., Ajlouni,R., Oonsombat,C., Laffoon,J.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Bone Mineral Density and Breast Cancer Risk Factors among Premenopausal and Postmenopausal Women A Systematic Review 2016 Faculty of Health Sciences, University Kebangsaan Malaysia, Jalan Raja Muda Abdul Aziz, Kuala Lumpur, Malaysia Email : kanaga@ ukm.edu.my.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Asian Pacific journal of cancer prevention : APJCP
Periodical, Abbrev.
Asian Pac.J.Cancer.Prev.
Pub Date Free Form
Volume
17
Issue
7
Start Page
3229
Other Pages
3234
Notes
JID: 101130625; ppublish
Place of Publication
Thailand
ISSN/ISBN
1513-7368; 1513-7368
Accession Number
PMID: 27509955
Language
eng
SubFile
Journal Article; IM
DOI
Output Language
Unknown(0)
PMID
27509955
Abstract
BACKGROUND: Bone mineral density (BMD) is a lifetime marker of estrogen in a woman's body and has been associated with increased breast cancer risk. Nonetheless the actual association is still debatable. Furthermore, estrogen is very crucial in maintaining human bone density and gradually decreases over age. A systematic search was conducted to assess any association of BMD with breast cancer risk factors among premenopausal and postmenopausal women. MATERIALS AND METHODS: Review identification was performed through databases searching on MEDLINE, CINAHL and SCOPUS and 19 qualified studies were elected. The keywords used were "bone mineral density", "breast cancer", and "breast density". RESULTS: A total of 19 articles showed variation with the majority of the studies focused on postmenopausal and a few focused on premenopausal women. Overall there was no concensus on effects. CONCLUSIONS: An enormous effort is being undertaken by researchers to prove that BMD might be one of the significant risk factors for breast cancer.
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Zain,N.M., Seriramulu,V.P., Chelliah,K.K.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Bone mineral density and risk of fractures in aging, obese post-menopausal women with type 2 diabetes. The GIUMO Study 2009 University of Las Palmas de Gran Canaria, Investigation Group on Osteoporosis, Hospital University Insular, Bone Metabolic Unit, Las Palmas de Gran Canaria, Canary Islands, Spain. msosa@ono.com
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Aging clinical and experimental research
Periodical, Abbrev.
Aging Clin.Exp.Res.
Pub Date Free Form
Feb
Volume
21
Issue
1
Start Page
27
Other Pages
32
Notes
LR: 20131121; JID: 101132995; 0 (Blood Glucose); 0 (Cholesterol, LDL); 0 (Hemoglobin A, Glycosylated); 0 (Triglycerides); 0 (hemoglobin A1c protein, human); 97C5T2UQ7J (Cholesterol); ppublish
Place of Publication
Italy
ISSN/ISBN
1594-0667; 1594-0667
Accession Number
PMID: 19225266
Language
eng
SubFile
Journal Article; Research Support, Non-U.S. Gov't; IM
DOI
5712 [pii]
Output Language
Unknown(0)
PMID
19225266
Abstract
BACKGROUND AND AIMS: Type 2 diabetes mellitus (DM) has a high prevalence in aging obese postmenopausal women. It is not clear whether or not diabetes produces an increase in bone mineral density or an increase in fracture rates. OBJECTIVE: The main objective of this study was to investigate whether type 2 DM produces a higher prevalence of vertebral, hip and non-vertebral fractures in obese postmenopausal Caucasian women. A secondary objective was to study the influence of DM in quantitative ultrasound measurements of the heel (QUS) and bone mineral density (BMD) measured by dual X-ray absorptiometry (DXA), in both lumbar spine (L2-L4) and proximal femur. METHOD: This study was a prospective cohort of 111 patients with type 2 DM and 91 control individuals (CTR) over age 65 and obese, recruited from 16 centers in Spain. MAIN OUTCOME MEASURES: Lateral dorsal and lumbar X-rays were performed to assess vertebral fractures. Hip and non-vertebral fractures were noted from medical records, written reports or Xray studies. QUS measurements were made of the calcaneus and BMD measurements of the lumbar spine (L2-L4) and proximal femur. RESULTS: Patients had higher BMD in the lumbar spine (L2-L4) than controls (0.979 g/cm2 vs 0.927 g/cm2, p=0.035), but we found no statistically significant differences in the proximal femur. QUS measurements showed similar values in both groups: BUA (69.3 dB/Mhz vs 66.7 dB/Mhz, p=0.291), SOS (1537 m/sg vs 1532 m/sg, p=0.249) and QUI (87.5 vs 83.7, p=0.153). No statistically significant differences were found in any case. There was no association between vertebral, hip and non-vertebral fractures and DM. The crude odds ratio, without adjusting was 1.045 (CI 95% 0.531 ; 2.059), and the adjusted odds ratio was 0.927 (CI 95% 0.461 ; 1.863). CONCLUSIONS: In obese postmenopausal Caucasian women, type 2 DM produces an increase in BMD of the lumbar spine without changes in BMD of the proximal femur or in QUS measurements of the heel. The prevalence of vertebral, hip and non-vertebral fractures did not increase in type 2 DM.
Descriptors
Aged, Aged, 80 and over, Aging/physiology, Blood Glucose/metabolism, Bone Density, Cholesterol/blood, Cholesterol, LDL/blood, Cross-Sectional Studies, Diabetes Mellitus, Type 2/blood/complications, European Continental Ancestry Group, Female, Femur/chemistry, Fractures, Bone/complications/epidemiology/etiology, Hemoglobin A, Glycosylated/metabolism, Humans, Lumbar Vertebrae/chemistry/pathology, Obesity/blood/complications, Postmenopause, Prevalence, Risk Factors, Spain/epidemiology, Spinal Fractures/epidemiology, Triglycerides/blood
Links
Book Title
Database
Publisher
Data Source
Authors
Sosa,M., Saavedra,P., Jodar,E., Lozano-Tonkin,C., Quesada,J. M., Torrijos,A., Perez-Cano,R., Nogues,X., Diaz-Curiel,M., Moro,M. J., Gomez,C., Mosquera,J., Alegre,J., Olmos,J., Munoz-Torres,M., Guanabens,N., Del Pino,J., Hawkins,F., GIUMO Study Group
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Bone mineral density of the spine and femur in healthy Saudi females: relation to vitamin D status, pregnancy, and lactation 1999 Department of Medicine (MBC-46), King Faisal Specialist Hospital and Research Centre, PO Box 3354, Riyadh 11211, Saudi Arabia.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Calcified tissue international
Periodical, Abbrev.
Calcif.Tissue Int.
Pub Date Free Form
Jul
Volume
65
Issue
1
Start Page
23
Other Pages
28
Notes
LR: 20131121; JID: 7905481; 0 (Parathyroid Hormone); 1406-16-2 (Vitamin D); SY7Q814VUP (Calcium); OID: PIP: 144813; OID: POP: 00289772; OTO: PIP; GN: PIP: TJ: CALCIFIED TISSUE INTERNATIONAL.; ppublish
Place of Publication
UNITED STATES
ISSN/ISBN
0171-967X; 0171-967X
Accession Number
PMID: 10369729
Language
eng
SubFile
Comparative Study; Journal Article; IM; J
DOI
CT152-98 [pii]
Output Language
Unknown(0)
PMID
10369729
Abstract
Bone mineral density (BMD) measurements of the anterio-posterior lumbar spine and the proximal femur using dual-energy x-ray absorptiometry, as well as relevant clinical and biochemical parameters, were determined in 321 healthy Saudi females in order to establish reference values and to study the effects of physical and lifestyle factors on BMD. Mean +/- SD of age, body mass index (BMI), number of pregnancies, and total duration of lactation were 35.4 +/- 11.3 years, 26.5 +/- 5.2 kg/m2, 3.1 +/- 3.1, and 23.7 +/- 42.4 months, respectively. Mean +/- SD of serum calcium, 25-hydroxyvitamin D (25OHD), and PTH levels were 2.37 +/- 0.09 mmol/liter, 24.5 +/- 17.2 nmol/liter, and 52.0 +/- 30.8 pg/ml, respectively. Peak BMD values were observed around age 35 years at the spine and earlier at the femur. Compared with USA females, Saudi females had lower weight-matched Z scores at the spine (-0.126 +/- 1. 078, P = 0.04), femoral neck (-0.234 +/- 0.846, P /=31 years old were 18-41% and 0-7%, respectively, depending on the site examined. Severe hypovitaminosis D (25OHD level </=20 nmol/liter) was present in 52% of the subjects. However, there was no correlation between 25OHD level and BMD at any site. Parathyroid hormone (PTH) levels correlated significantly with 25OHD levels (r = -0.28, P < 0.0001) and with weight-matched BMD Z scores at the spine (r = -0.17, P = 0.005), femoral neck (r = -0.16, P = 0.007), and Ward's triangle (r = -0.2, P = 0.0008), suggesting that the distribution of 25OHD levels in the cohort is below the threshold needed for maintaining normal BMD. On the other hand, number of pregnancies and total duration of lactation correlated with weight-matched BMD Z scores at the spine (r = -0.17, P = 0.003; r = -0.1, P = 0.08, respectively). We conclude that BMD in healthy Saudi females is significantly lower than in their USA counterparts. This may be due in part to increased number of pregnancies and longer duration of lactation together with prevalent vitamin D deficiency. http://link.springer-ny.com/link/service/journals/00223/bibs /65n1p23. html; PIP: This paper examines the relationship between bone mineral density (BMD) of the spine and femur and vitamin D status, pregnancy, and lactation among women in Saudi Arabia. The aims of the study are the following: 1) establish normative data for BMD at the anterio-posterior lumbar spine and femur using dual x-ray absorptiometry; 2) compare the BMD of Saudi females and their US counterparts; and 3) examine the relation of BMD to vitamin D status, pregnancy, and lactation. Samples included 321 healthy Saudi females recruited from the city of Riyadh, Saudi Arabia. Results suggest that the mean standard deviation (SD) of age, body mass index, number of pregnancies, and total duration of lactation were, respectively, 35.4 +or- 11.3 years, 26.5 +or- 5.2 kg/sq. m, 3.1 +or- 3.1, and 23.7 +or- 42.4 months. Mean +or- SD of serum calcium, 25-hydroxyvitamin D (25OHD), and PTH levels were 2.37 +or- 0.09 mmol/liter, 24.5 +or- 17.2 nmol/liter, and 52.0 +or- 30.8 pg/ml, respectively. Peak BMD values were observed around age 35 years at the spine and earlier at the femur. Compared with US females, Saudi females had lower weight-matched Z scores at the spine, femoral neck, and Ward's triangle. On the other hand, the number of pregnancies and total duration of lactation correlated with weight-matched BMD Z scores at the spine. This made the BMD in healthy Saudi females significantly lower than their US counterparts. This may due to the increase number of pregnancies and longer duration of lactation together with prevalent vitamin D deficiency.
Descriptors
Absorptiometry, Photon, Adolescent, Adult, Aged, Bone Density, Calcium/blood, Child, Female, Femur Neck/metabolism/radiography, Humans, Lactation/physiology, Lumbar Vertebrae/metabolism/radiography, Middle Aged, Parathyroid Hormone/blood, Pregnancy/physiology, Reference Values, Saudi Arabia, United States, Vitamin D/blood, Arab Countries, Asia, Biology, Clinical Research, Deficiency Diseases--women, Developing Countries, Diseases, Lactation, Maternal Physiology, Micronutrients, Nutrition Disorders, Osteoporosis--women, Physiology, Pregnancy, Reproduction, Research Methodology, Research Report, Skeletal Effects--women, Vitamins, Western Asia, Women
Links
Book Title
Database
Publisher
Data Source
Authors
Ghannam,N. N., Hammami,M. M., Bakheet,S. M., Khan,B. A.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Boom and bust inflation: a graceful exit via compact extra dimensions 2008
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Phys Rev Lett
Periodical, Abbrev.
Phys.Rev.Lett.
Pub Date Free Form
Volume
101
Issue
22
Start Page
221302
Other Pages
221302
Notes
ID: 19113473
Place of Publication
ISSN/ISBN
Accession Number
Language
en
SubFile
DOI
Output Language
Unknown(0)
PMID
Abstract
A model of inflation is proposed in which compact extra dimensions allow a graceful exit without recourse to flat potentials or super-Planckian field values. Though bubbles of true vacuum are too sparse to uniformly reheat the Universe by colliding with each other, a compact dimension enables a single bubble to uniformly reheat by colliding with itself. This mechanism, which generates an approximately scale invariant perturbation spectrum, requires that inflation be driven by a bulk field, that vacuum decay be slow, and that the extra dimension be at least a hundred times larger than the false vacuum Hubble length.
Descriptors
Links
http://pesquisa.bvsalud.org/ghl/resource/en/mdl-19113473
Book Title
Database
MEDLINE; http://www.globalhealthlibrary.net/
Publisher
Data Source
Authors
Brown,Adam R.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors