Skip to main content
Title Pub Year Author Sort descending SearchLink
N-(4-Meth-oxy-phen-yl)-6-methyl-2-phenyl-5-{[4-(tri-fluoro-meth-yl)anilino]meth-y l}pyrimidin-4-amine 2013 Department of Organic Chemistry, Wroclaw Medical University, 9 Grodzka St, 50-137 Wroclaw, Poland.; Department of Applied Pharmacy, Wroclaw Medical Uniwersity, 38 Szewska St, 50-137 Wroclaw, Poland.; Department of Bioorganic Chemistry, Faculty of Engineer
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Acta crystallographica.Section E, Structure reports online
Periodical, Abbrev.
Acta Crystallogr.Sect.E.Struct.Rep.Online
Pub Date Free Form
27-Nov
Volume
69
Issue
Pt 12
Start Page
o1831
Other Pages
2
Notes
LR: 20140127; JID: 101089178; OID: NLM: PMC3885078; 2013/12/01 [ecollection]; 2013/11/16 [received]; 2013/11/20 [accepted]; 2013/11/27 [epublish]; epublish
Place of Publication
United States
ISSN/ISBN
1600-5368; 1600-5368
Accession Number
PMID: 24454254
Language
eng
SubFile
Journal Article
DOI
10.1107/S160053681303170X [doi]
Output Language
Unknown(0)
PMID
24454254
Abstract
The title compound, C26H23F3N4O, crystallizes with two symmetry-independent mol-ecules in the asymmetric unit, denoted A and B, which differ mainly in the rotation of the meth-oxy-phenyl ring. The -CF3 group of mol-ecule B is disordered by rotation, with the F atoms split over two sets of sites; the occupancy factor for the major component is 0.853 (4). The dihedral angles between the pyrimidine ring and the attached phenyl, meth-oxy-phenyl and tri-fluoro-methyl-phenyl rings are 8.1 (2), 37.5 (2) and 70.7 (2) degrees , respectively, in mol-ecule A, and 9.3 (2), 5.3 (2) and 79.7 (2) degrees in mol-ecule B. An intra-molecular N-Hcdots, three dots, centeredN hydrogen bond occurs in each mol-ecule. In the crystal, two crystallographically independent mol-ecules associate into a dimer via a pair of N-Hcdots, three dots, centeredN hydrogen bonds, with a resulting R 2 (2)(12) ring motif and pi-pi stacking inter-actions [centroid-centroid distance = 3.517 (4) A] between the pyrimidine rings. For the A mol-ecules, there are inter-molecular C-Hcdots, three dots, centeredO hydrogen bonds between an aryl C atom of meth-oxy-phenyl ring and a meth-oxy O atom of an adjacent mol-ecule. A similar inter-action is lacking in the B mol-ecules.
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Cieplik,J., Pluta,J., Bryndal,I., Lis,T.
Original/Translated Title
URL
Date of Electronic
20131127
PMCID
PMC3885078
Editors
Bonding orthodontic brackets to porcelain using different adhesives/enamel conditioners: a comparative study 2005 Department of Orthodontics, College of Dentistry, University of Iowa, 220 Dental Science S, Iowa City, IA 52242-1001, USA Linda-keller@uiowa.edu
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
World journal of orthodontics
Periodical, Abbrev.
World J.Orthod.
Pub Date Free Form
Spring
Volume
6
Issue
1
Start Page
17
Other Pages
24
Notes
LR: 20131121; JID: 100959981; 0 (Composite Resins); 0 (Cyanoacrylates); 0 (Phosphoric Acids); 0 (Resin Cements); 0 (Silanes); 0 (Smartbond); 12001-21-7 (Dental Porcelain); 135669-49-7 (Transbond); 454I75YXY0 (Bisphenol A-Glycidyl Methacrylate); RGL5YE86CZ
Place of Publication
United States
ISSN/ISBN
1530-5678; 1530-5678
Accession Number
PMID: 15794038
Language
eng
SubFile
Clinical Trial; Comparative Study; Journal Article; Randomized Controlled Trial; D; IM
DOI
Output Language
Unknown(0)
PMID
15794038
Abstract
AIM: To evaluate the use of new adhesive/primer materials, including an experimental self-etch primer and a cyanocrylate adhesive, to enhance the shear strength of orthodontic brackets bonded to porcelain surfaces. MATERIAL AND METHODS: Sixty porcelain maxillary central incisor teeth were used. The teeth were randomly divided into four groups: group 1, teeth were etched with 37% phosphoric acid and the brackets were bonded with a composite adhesive; group 2, teeth were microetched, hydrofluoric acid and silane applied, and then the brackets were bonded with a composite adhesive; group 3, an acid-etch primer was used, then the brackets were bonded with the same composite adhesive as in the first 2 groups; group 4, teeth were etched with 35% phosphoric acid and the brackets were bonded with the cyanoacrylate adhesive. RESULTS: The analysis of variance comparing the groups tested (F = 9.446) indicated that there was a significant difference between the 4 groups. The cyanoacrylate adhesive had the lowest shear bond strength (mean = 1.7 +/- 2.1 MPa), followed by the conventional bonding using a 37% phosphoric acid etch and composite (mean = 2.1 +/- 1.2 MPa). The use of Transbond after microetching, with the application of hydrofluoric acid and silane, provided the highest shear bond strength (mean = 5.5 +/- 2.7 MPa). Transbond used with the acid etch-primer had a lower bond strength (mean = 3.8 +/- 2.5 MPa), but was not significantly different from the microetch/hydrofluoric acid/silane group. CONCLUSION: The results indicated that the use of a phosphoric acid etch with either a cyanoacrylate or composite adhesive to bond orthodontic brackets to porcelain surfaces produced significantly lower shear bond strength. Self-etch primers produced higher but less consistent shear bond strength for bonding orthodontic brackets. The most reliable bonding procedure to porcelain surfaces is through microetching with the use of hydrofluoric acid and a silane coupler before bonding, but this also produces the greatest damage to the porcelain surface.
Descriptors
Acid Etching, Dental/methods, Air Abrasion, Dental, Bisphenol A-Glycidyl Methacrylate/chemistry, Composite Resins/chemistry, Cyanoacrylates/chemistry, Dental Bonding, Dental Enamel, Dental Porcelain/chemistry, Humans, Hydrofluoric Acid/chemistry, Materials Testing, Orthodontic Brackets, Phosphoric Acids/chemistry, Resin Cements/chemistry, Shear Strength, Silanes/chemistry, Stress, Mechanical, Surface Properties
Links
Book Title
Database
Publisher
Data Source
Authors
Bishara,S. E., Ajlouni,R., Oonsombat,C., Laffoon,J.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Effect of light-cured filled sealant on shear bond strength of metal and ceramic brackets bonded with a resin-modified glass ionomer cement 2009 Department of Orthodontics, Faculty of Dentistry, Gazi University, Ankara, Turkey. kaleselin@yahoo.com
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
American Journal of Orthodontics and Dentofacial Orthopedics : Official Publication of the American Association of Orthodontists, its Constituent Societies, and the American Board of Orthodontics
Periodical, Abbrev.
Am.J.Orthod.Dentofacial Orthop.
Pub Date Free Form
Feb
Volume
135
Issue
2
Start Page
194
Other Pages
198
Notes
LR: 20151119; JID: 8610224; 0 (Acrylic Resins); 0 (Aluminum Silicates); 0 (Dental Alloys); 0 (Fuji Ortho LC); 0 (Glass Ionomer Cements); 0 (Phosphoric Acids); 0 (Pro Seal); 0 (Resin Cements); 059QF0KO0R (Water); E4GA8884NN (phosphoric acid); 2007/08/01 [r
Place of Publication
United States
ISSN/ISBN
1097-6752; 0889-5406
Accession Number
PMID: 19201326
Language
eng
SubFile
Comparative Study; Journal Article; Randomized Controlled Trial; D; IM
DOI
10.1016/j.ajodo.2007.12.024 [doi]
Output Language
Unknown(0)
PMID
19201326
Abstract
INTRODUCTION: Our objective was to evaluate the effects of a highly filled light-cured sealant (HFLCS) on the shear bond strength and bond failure site of metal and ceramic brackets bonded with resin-modified glass ionomer cement (RMGIC). METHODS: Eighty freshly extracted maxillary premolars were randomly divided into 4 groups (20 in each group). In all groups, the teeth were etched with 37% phosphoric acid for 20 seconds, and RMGIC (Fuji Ortho LC, GC Europe, Leuven, Belgium) was used for bracket bonding. In groups 1 and 3, the brackets were bonded directly to etched enamel surfaces; in groups 2 and 4, the etched enamel was covered with HFLCS (Pro Seal, Reliance Orthodontic Products, Itasca, Ill). Groups 1 and 2 received metal brackets, and groups 3 and 4 had ceramic brackets. The specimens were stored in distilled water at room temperature for 24 hours and subsequently tested in shear mode with a universal testing machine. After debonding, the teeth and the brackets were examined under a stereomicroscope (model SMZ-1B, Nikon, Osaka, Japan) at 20-times magnification to assess the residual adhesive on the tooth surfaces. RESULTS: Interaction between HFLCS and bracket type was not statistically significant (P = 0.15). Pretreatment with HFLCS did not cause a statistically significant change in the shear bond values of either metal or ceramic brackets (P = 0.38). Shear bond values of the ceramic brackets were higher than those of the metal brackets independent of HFLCS application (P <0.001). No significant differences were found in bond failure modes in the 4 groups. CONCLUSIONS: HFLCS application on enamel etched with 37% phosphoric acid did not affect the bond strength values and the bond failure modes of metal and ceramic brackets bonded with RMGIC. RESULTS: Interaction between HFLCS and bracket type was not statistically significant (P = 0.15). Pretreatment with HFLCS did not cause a statistically significant change in the shear bond values of either metal or ceramic brackets (P = 0.38). Shear bond values of the ceramic brackets were higher than those of the metal brackets independent of HFLCS application (P <0.001). No significant differences were found in bond failure modes in the 4 groups. CONCLUSIONS: HFLCS application on enamel etched with 37% phosphoric acid did not affect the bond strength values and the bond failure modes of metal and ceramic brackets bonded with RMGIC.
Descriptors
Acid Etching, Dental, Acrylic Resins/chemistry, Aluminum Silicates/chemistry, Ceramics/chemistry, Dental Alloys/chemistry, Dental Enamel/pathology, Glass Ionomer Cements/chemistry, Humans, Light-Curing of Dental Adhesives, Materials Testing, Orthodontic Appliance Design, Orthodontic Brackets, Phosphoric Acids/chemistry, Resin Cements/chemistry, Shear Strength, Stress, Mechanical, Surface Properties, Temperature, Time Factors, Water/chemistry
Links
Book Title
Database
Publisher
Data Source
Authors
Varlik,S. K., Ulusoy,C.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Evaluation of shear bond strength with different enamel pre-treatments 2004 Department of Orthodontics, Faculty of Dentistry, Jordan University of Science and Technology, Irbid, Jordan.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
European journal of orthodontics
Periodical, Abbrev.
Eur.J.Orthod.
Pub Date Free Form
Apr
Volume
26
Issue
2
Start Page
179
Other Pages
184
Notes
LR: 20041117; JID: 7909010; 0 (Panavia TPN-S); 0 (Phosphates); 0 (Resin Cements); 0 (Transbond XT); ppublish
Place of Publication
England
ISSN/ISBN
0141-5387; 0141-5387
Accession Number
PMID: 15130041
Language
eng
SubFile
Journal Article; D; IM
DOI
Output Language
Unknown(0)
PMID
15130041
Abstract
The purpose of this study was to investigate the shear bond strengths of two adhesives, Panavia-21 and a composite resin (Transbond XT), with different enamel pre-treatments, acid etching (37 per cent phosphoric acid) and grit blasting (50 microm aluminium oxide particles). The mode of bond failure was also assessed using the modified adhesive remnant index (ARI). Ninety freshly extracted non-carious human premolar teeth were randomly divided into the following groups: (1) Transbond XT, acid-etched enamel surface; (2) Panavia-21, acid-etched enamel surface; (3) Transbond XT, grit-blasted enamel surface; (4) Panavia-21, grit-blasted enamel surface; (5) Transbond XT, acid-etched enamel surface with grit-blasted brackets; (6) Panavia-21, acid-etched enamel surface with grit-blasted brackets. All groups had stainless steel brackets bonded to the buccal surface of each tooth. An Instron universal testing machine was used to determine the shear bond strengths at a crosshead speed of 0.5 mm/second. Statistical analysis was undertaken using analysis of variance and the Tukey test. The mean bond strength values were as follows: group 1, 135.7 +/- 23.0 N; group 2, 181.5 +/- 18.4 N; group 3, 38.4 +/- 27.5 N; group 4, 59.1 +/- 24.1 N; group 5, 106.7 +/- 21.5 N; group 6, 165.3 +/- 21.4 N. Panavia-21 with the acid-etched enamel surface had a significantly higher shear bond strength than the other groups (P < 0.001). This was followed by the composite group with the acid-etched enamel surface. This group differed significantly from the composite and Panavia-21 groups with the grit-blasted tooth surface (P < 0.001) and from the composite and Panavia-21 groups with the acid-etched enamel surface and grit-blasted brackets (P < 0.01). The current findings indicate that Panavia-21 is an excellent adhesive and produces a bond strength that is clinically useful. Enamel surface preparation using grit blasting alone results in a significantly lower bond strength and should not be advocated for clinical use.
Descriptors
Analysis of Variance, Dental Bonding, Dental Enamel, Dental Etching/methods, Dental Stress Analysis, Humans, Materials Testing, Orthodontic Brackets, Phosphates, Random Allocation, Resin Cements, Shear Strength, Surface Properties
Links
Book Title
Database
Publisher
Data Source
Authors
Abu Alhaija,E. S., Al-Wahadni,A. M.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
A new generation of self-etching adhesives: comparison with traditional acid etch technique 2008 Department of Orthodontics, Friedrich Alexander University, Erlangen-Nuremberg, Germany.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Journal of orofacial orthopedics = Fortschritte der Kieferorthopadie : Organ/official journal Deutsche Gesellschaft fur Kieferorthopadie
Periodical, Abbrev.
J.Orofac.Orthop.
Pub Date Free Form
Mar
Volume
69
Issue
2
Start Page
78
Other Pages
93
Notes
JID: 9713484; 0 (BOND-1 adhesive); 0 (Composite Resins); 0 (Methacrylates); 0 (Resin Cements); 0 (Transbond Plus Self-Etching Primer); 0 (Transbond XT Light Cure Adhesive Primer); 2007/03/13 [received]; 2007/12/19 [accepted]; ppublish
Place of Publication
Germany
ISSN/ISBN
1434-5293; 1434-5293
Accession Number
PMID: 18385954
Language
eng; ger
SubFile
Comparative Study; Journal Article; D; IM
DOI
10.1007/s00056-008-0709-6 [doi]
Output Language
Unknown(0)
PMID
18385954
Abstract
OBJECTIVE: The aim of this study was to determine the shear bond strength (SBS), etching pattern and depth, and debonding performance of several market-leading, self-etching (SE) adhesives primarily used in restorative dentistry (iBond, Clearfil S(3) Bond, Clearfil Protect Bond, AdheSE, XenoIII), two experimental self-etching adhesives (exp. Bond 1, exp. Bond 2) and one experimental self-etching cement (SE Zement) used with and without prior phosphoric acid-etching, and to compare them to an orthodontic self-etching product (Transbond Plus SE Primer) and to traditional acid-etch technique (Transbond XT Primer, phosphoric acid) MATERIALS AND METHODS: All adhesives were applied on pumiced and embedded bovine incisors following the manufacturers' instructions. Then one bracket each (coated with Transbond XT composite) was bonded (n = 20). Transbond XT was polymerized for 20 s from the incisal and gingival sides using a halogen device positioned at a constant 5 mm from and a 45 degrees angle to the specimen. The specimens were stored in distilled water for 24 h at 37 degrees C before measuring SBS. The ARI (adhesive remnant index) for all specimens was determined from the sheared-off brackets of each. After conditioning, the surface texture was morphologically evaluated from scanning electron microscope (SEM) images, while the etching depth was determined using a confocal laser-scanning microscope (CLSM). All groups were tested for normal distribution and analyzed by applying ANOVA, Kruskal-Wallis or the t test. In addition, a Bonferroni correction was used. RESULTS: The median values of the SBS tests were: SE Zement 3.0 MPa, SE Zement preceded by phosphoric acid etching 11.2 MPa, experimental bond 1: 7.4 MPa, experimental bond 2: 5.6 MPa, iBond 8.1 MPa, Clearfil S(3) Bond 14.1 MPa, Clearfil Protect Bond 16.6 MPa, Clearfil SE Bond 15.9 MPa, AdheSE 16.0 MPa, XenoIII 16.1 MPa, Transbond SE Primer 20.7 MPa, acid-etching+Transbond XT Primer 21.0 MPa. With the exception of iBond, we observed no significant differences among the self-etching adhesives used in Restorative Dentistry or in comparison to the Transbond Plus SE Primer. No significant differences were apparent even when compared to the Transbond XT Primer after phosphoric acid-etching. Both experimental bonding agents and SE Zement without acid etching performed significantly worse than the products mentioned above, failing to demonstrate sufficient adhesive strength. SEM examination revealed less distinctive enamel-etching patterns for self-etching products than for phosphoric acid-etching. CLSM analysis revealed etching depths between 0.5 and 20 microm depending on the product. When self-etching products were used, less residual composite remained on the enamel surface than after phosphoric acid-etching. CONCLUSIONS: All the adhesives tested are suitable for bonding orthodontic brackets and to reduce the risk of enamel fracture while minimizing etching depth, which in turns means less conditioning-related enamel loss. More development is needed to improve the etching performance of both experimental bonding agents and SE Zement.
Descriptors
Acid Etching, Dental/methods, Animals, Cattle, Composite Resins/analysis, Dental Bonding, Dental Debonding, Dental Enamel/drug effects/pathology, Humans, Methacrylates/analysis, Microscopy, Confocal, Microscopy, Electron, Scanning, Orthodontic Brackets, Resin Cements/analysis, Shear Strength, Surface Properties
Links
Book Title
Database
Publisher
Data Source
Authors
Holzmeier,M., Schaubmayr,M., Dasch,W., Hirschfelder,U.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Efficacy of using self-etching primer with a 4-META/MMA-TBB resin cement in bonding orthodontic brackets to human enamel and effect of saliva contamination on shear bond strength 2004 Department of Orthodontics, Nihon University School of Dentistry at Matsudo, Chiba, Japan. somsak@mascat.nihon-u.ac.jp
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The Angle Orthodontist
Periodical, Abbrev.
Angle Orthod.
Pub Date Free Form
Apr
Volume
74
Issue
2
Start Page
251
Other Pages
258
Notes
LR: 20121115; JID: 0370550; 0 (Boron Compounds); 0 (Megabond); 0 (Methacrylates); 0 (Methylmethacrylates); 0 (Phosphoric Acids); 0 (Resin Cements); 95508-14-8 (Super-bond); E4GA8884NN (phosphoric acid); ppublish
Place of Publication
United States
ISSN/ISBN
0003-3219; 0003-3219
Accession Number
PMID: 15132453
Language
eng
SubFile
Comparative Study; Journal Article; Research Support, Non-U.S. Gov't; D; IM
DOI
10.1043/0003-3219(2004)074<0251:EOUSPW>2.0.CO;2 [doi]
Output Language
Unknown(0)
PMID
15132453
Abstract
The objective of this study was (1) to evaluate the effectiveness of Megabond when used with Superbond C&B, a 4-methacryloloxyethyl trimellitate anhydride (4-META)/methyl methacrylate (MMA)-tri-n-butyl borane (TBB) resin, to bond orthodontic metal brackets to human enamel and (2) to examine the influence of saliva contamination on shear bond strength. Metal brackets were bonded to phosphoric acid-etched or Megabond-treated human premolars using Superbond C&B resin cement. The effects of saliva contamination after acid etching or self-etch priming, and the effect of re-etching or self-etch priming after saliva contamination on shear bond strength were also assessed. The shear bond strengths were measured after immersion in water at 37 degrees C for 24 hours. Data were analyzed using two-way analysis of variance and Fisher's protected least significant difference test for multiple comparisons. There were no significant differences in shear bond strength between phosphoric acid etching and self-etch priming for no contamination, saliva contamination, and repeat treatment (etching or priming) after saliva contamination. With phosphoric acid etching, saliva contamination significantly decreased the shear bond strength. Repeat phosphoric acid etching after saliva contamination did not significantly improve the bond strengths. With self-etching primer treatment, however, saliva contamination did not cause any decrease of bond strength. Phosphoric acid etching produced more enamel fracture than self-etching primer treatment. Field-emission scanning microscopy revealed less dissolution of enamel surface resulted from self-etching primer compared with phosphoric acid. These results suggest that Megabond when used with Superbond C&B resin cement may be a good candidate for bonding orthodontic brackets to human enamel.
Descriptors
Acid Etching, Dental/methods, Analysis of Variance, Boron Compounds, Chi-Square Distribution, Dental Bonding, Dental Enamel/drug effects, Dental Stress Analysis, Humans, Materials Testing, Methacrylates/pharmacology, Methylmethacrylates, Microscopy, Electron, Scanning, Orthodontic Brackets, Phosphoric Acids/pharmacology, Random Allocation, Resin Cements, Saliva, Shear Strength, Surface Properties/drug effects
Links
Book Title
Database
Publisher
Data Source
Authors
Sirirungrojying,S., Saito,K., Hayakawa,T., Kasai,K.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Shear bond strength of orthodontic brackets bonded with self-etching primer to intact and pre-conditioned human enamel 2008 Department of Orthodontics, School of Dental Medicine, Saint Joseph University, Beirut, Lebanon. elie.el-amm@usj.edu.lb
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Journal of orofacial orthopedics = Fortschritte der Kieferorthopadie : Organ/official journal Deutsche Gesellschaft fur Kieferorthopadie
Periodical, Abbrev.
J.Orofac.Orthop.
Pub Date Free Form
Sep
Volume
69
Issue
5
Start Page
383
Other Pages
392
Notes
LR: 20141120; JID: 9713484; 0 (Resin Cements); 0 (Transbond Plus Self-Etching Primer); ppublish
Place of Publication
Germany
ISSN/ISBN
1434-5293; 1434-5293
Accession Number
PMID: 19238890
Language
eng; ger
SubFile
Comparative Study; Journal Article; D; IM
DOI
Output Language
Unknown(0)
PMID
19238890
Abstract
OBJECTIVE: The purpose of this study was to evaluate the shear bond strength of orthodontic bracket when bonded to pre-conditioned and intact enamel using a self-etching primer within 6 hours and after thermal cycling. MATERIAL AND METHODS: One hundred and twenty freshly-extracted human teeth were divided into four groups according to how the buccal surface to be bonded had been pre-conditioned: 1) acid-etched with 37% phosphoric acid, 2) sand-blasted with 50 microns aluminum-oxide, 3) matted with diamond burr, and 4) intact enamel used as control. Orthodontic metal brackets were bonded to the teeth using the same composite resin (Transbond XT) and self-etching primer (Transbond Plus Self-Etching Primer). Brackets were debonded within 6 hours or after thermal cycling for 2500 times (5 degrees C--37 degrees C--55 degrees C). Shear bond strength was measured on a testing machine at a crosshead speed of 3 mm/min. The bracket-failure interface was quantified according to the modified adhesive remnant index score (ARI). Data were analyzed using the two-way ANOVA test, Scheffe confidence interval of differences of means, and the chi-square test (p < 0.05). RESULTS: All the pre-conditioned groups showed significantly higher shear bond strength before and after thermal cycling than the control group. There was no significant correlation between thermal cycling and shear bond strength. The ARI scores revealed that the bond failed primarily on the adhesive-enamel interface in all groups before and after thermal cycling, with the exception of the acid-etched group, whose bonds failed mainly on the adhesive-bracket interface after thermal cycling. CONCLUSION: The authors recommend that the enamel be preconditioned before applying the self-etching primer when greater shear bond strength is desired.
Descriptors
Acid Etching, Dental/methods, Dental Bonding/methods, Humans, In Vitro Techniques, Orthodontic Brackets, Resin Cements, Shear Strength
Links
Book Title
Database
Publisher
Data Source
Authors
Amm,E. W., Hardan,L. S., BouSerhal,J. P., Glasl,B., Ludwig,B.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
What bone graft substitutes should we use in post-traumatic spinal fusion? 2011 Department of Orthopaedic Surgery and Traumatology, Hospital Costa del Sol, University of Malaga, Autovia A-7 Km 187, 29603 Marbella, Malaga, Spain. eguerado@hcs.es
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Injury
Periodical, Abbrev.
Injury
Pub Date Free Form
Sep
Volume
42 Suppl 2
Issue
Start Page
S64
Other Pages
71
Notes
LR: 20131121; CI: Copyright (c) 2011; JID: 0226040; 0 (Bone Morphogenetic Proteins); 0 (Bone Substitutes); 0 (Calcium Phosphates); 2011/08/15 [aheadofprint]; ppublish
Place of Publication
Netherlands
ISSN/ISBN
1879-0267; 0020-1383
Accession Number
PMID: 21839997
Language
eng
SubFile
Journal Article; IM
DOI
10.1016/j.injury.2011.06.200 [doi]
Output Language
Unknown(0)
PMID
21839997
Abstract
Surgical treatment of spinal fractures consists of postural reduction and segmental arthrodesis, together with an eventual performance of spinal canal decompression. Spinal arthrodesis consists of the combination of a hardware system for mechanical stabilisation together with a biological substance for enhancement of bone formation. To date, autologous graft is the only biological substance demonstrated to possess osteogenic properties. Cancellous bone graft has greater cellular activity than cortical graft, whereas cortical graft is stronger. Consequently, according to biological and biomechanical properties of autograft, spinal posterior arthrodesis is better enhanced by cancellous autograft, whereas anterior interbody tricortical bone is more suitable for anterior fusion. Allograft does not cause harvesting complications as autograft does, and also its amount is theoretically unlimited; nevertheless the rate of bone fusion facilitated by allograft is far from that enhanced by autograft given that allograft has no osteoprogenitor cells. There is little evidence on the efficacy of demineralised bone matrix for spinal fusion. Bone morphogenetic proteins (BMPs) are in use in spinal surgery, but their exact role with respect to type, dose, and carrier, together with their cost-effectiveness, need further clinical delineation. Calcium phosphate compounds appear to be good as carriers; however, they have no osteoinductive or osteogenic properties. Current clinical literature seem to indicate their usefulness for bony fusion in spinal surgery, when combined with bone marrow aspirate or used as an extender for autologous bone graft. Age, length of fusion, location, and concurrent diseases should be definitive for fusion outcome; papers on spinal arthrodesis should neatly stratify these variables. Unfortunately, since that is not the rule, conclusions drawn from current literature are very unreliable. Autograft remains the gold standard, and cancellous bone is advisable in posterolateral approaches, whereas tricortical iliac crest autograft appears appropriate for interbody support. In longer segments, its expansion with BMPs looks safe at least. Basic knowledge has been achieved from animal experiments, and clinical application of the findings to humans should be done very cautiously; in any case, both anterior and posterior arthrodesis must be protected with instrumentation used according to appropriate biomechanical principles. A combination of failure of the correct graft together with proper instrumentation will result in poorer outcome, even if the right graft is used.
Descriptors
Age Factors, Aged, Biomechanical Phenomena, Bone Morphogenetic Proteins/therapeutic use, Bone Substitutes/therapeutic use, Bone Transplantation/methods, Calcium Phosphates/therapeutic use, Decompression, Surgical, Fracture Healing/physiology, Humans, Male, Middle Aged, Osteogenesis/physiology, Spinal Fractures/surgery, Spinal Fusion/methods, Spine/surgery, Tissue and Organ Harvesting/adverse effects/methods, Transplantation, Autologous/instrumentation, Transplantation, Homologous, Treatment Outcome
Links
Book Title
Database
Publisher
Elsevier Ltd
Data Source
Authors
Guerado,E., Fuerstenberg,C. H.
Original/Translated Title
URL
Date of Electronic
20110815
PMCID
Editors
Biologics in spine arthrodesis 2015 Department of Orthopaedic Surgery, Feinberg School of Medicine, Northwestern University, Chicago, IL.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Journal of spinal disorders & techniques
Periodical, Abbrev.
J.Spinal.Disord.Tech.
Pub Date Free Form
Jun
Volume
28
Issue
5
Start Page
163
Other Pages
170
Notes
JID: 101140323; 0 (Bone Morphogenetic Protein 2); 0 (Recombinant Proteins); ppublish
Place of Publication
United States
ISSN/ISBN
1539-2465; 1536-0652
Accession Number
PMID: 25978141
Language
eng
SubFile
Journal Article; Review; IM
DOI
10.1097/BSD.0000000000000281 [doi]
Output Language
Unknown(0)
PMID
25978141
Abstract
Spine fusion is a tool used in the treatment of spine trauma, tumors, and degenerative disorders. Poor outcomes related to failure of fusion, however, have directed the interests of practitioners and scientists to spinal biologics that may impact fusion at the cellular level. These biologics are used to achieve successful arthrodesis in the treatment of symptomatic deformity or instability. Historically, autologous bone grafting, including iliac crest bong graft harvesting, had represented the gold standard in spinal arthrodesis. However, due to concerns over potential harvest site complications, supply limitations, and associated morbidity, surgeons have turned to other bone graft options known for their osteogenic, osteoinductive, and/or osteoconductive properties. Current bone graft selection includes autograft, allograft, demineralized bone matrix, ceramics, mesenchymal stem cells, and recombinant human bone morphogenetic protein. Each pose their respective advantages and disadvantages and are the focus of ongoing research investigating the safety and efficacy of their use in the setting of spinal fusion. Rh-BMP2 has been plagued by issues of widespread off-label use, controversial indications, and a wide range of adverse effects. The risks associated with high concentrations of exogenous growth factors have led to investigational efforts into nanotechnology and its application in spinal arthrodesis through the binding of endogenous growth factors. Bone graft selection remains critical to successful fusion and favorable patient outcomes, and orthopaedic surgeons must be educated on the utility and limitations of various biologics in the setting of spine arthrodesis.
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Kannan,A., Dodwad,S.N., Hsu,W.K.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
The safety and efficacy of OP-1 (rhBMP-7) as a replacement for iliac crest autograft for posterolateral lumbar arthrodesis: minimum 4-year follow-up of a pilot study 2008 Department of Orthopaedic Surgery, Thomas Jefferson University and The Rothman Institute, 925 Chestnut Street, 5(th) Floor, Philadelphia, Pennsylvania, PA 19107, USA.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The spine journal : official journal of the North American Spine Society
Periodical, Abbrev.
Spine J.
Pub Date Free Form
May-Jun
Volume
8
Issue
3
Start Page
457
Other Pages
465
Notes
JID: 101130732; 0 (Bone Morphogenetic Proteins); 0 (osteogenic protein 1 putty, recombinant human); 2007/01/16 [received]; 2007/03/12 [revised]; 2007/03/19 [accepted]; 2007/05/25 [aheadofprint]; ppublish
Place of Publication
United States
ISSN/ISBN
1529-9430; 1529-9430
Accession Number
PMID: 17588821
Language
eng
SubFile
Journal Article; Multicenter Study; Randomized Controlled Trial; Research Support, Non-U.S. Gov't; IM
DOI
S1529-9430(07)00128-3 [pii]
Output Language
Unknown(0)
PMID
17588821
Abstract
BACKGROUND CONTEXT: Although autogenous bone is still considered to be the gold standard graft material for promoting spinal fusion, other bone graft substitutes have been developed in an attempt to improve arthrodesis rates and avoid the complications associated with the procurement of autograft. The bone morphogenetic proteins (BMPs) represent a family of osteoinductive growth factors that are known to stimulate the osteoblastic differentiation of stem cells. Osteogenic protein-1 (OP-1) Putty is a commercially available BMP preparation that is already approved for use in humans. Previous clinical studies involving patients with degenerative spondylolisthesis have reported that the efficacy and safety of OP-1 Putty is comparable to that of autograft at both 1- and 2-year follow-up. PURPOSE: The purpose of this study was to evaluate the intermediate-term efficacy and safety of OP-1 Putty as an alternative to autogenous bone by comparing the 4-year radiographic, clinical, and safety data of these same patients who underwent decompression and uninstrumented fusion with either OP-1 Putty or iliac crest autograft. STUDY DESIGN/SETTING: A prospective, randomized, controlled, multicenter clinical pilot study. PATIENT SAMPLE: Thirty-six patients undergoing decompressive laminectomy and single-level uninstrumented fusion for degenerative spondylolisthesis and symptomatic spinal stenosis were randomized in a 2:1 fashion to receive either OP-1 Putty (24 patients) or autogenous iliac crest bone graft (12 patients). OUTCOME MEASURES: Patient-reported outcome measures consisting of Oswestry Disability Index and Medical Outcomes Study 36-Item Short Form Health Survey (SF-36) scores were used to evaluate clinical efficacy. Perioperative data including operative time, estimated blood loss, and duration of hospital stay were also recorded for each surgery. Postoperatively, a neurological examination and an assessment of donor-site pain (if applicable) were performed at every follow-up visit. Radiographic fusion success was defined as the presence of continuous bridging bone formation between the transverse processes at the level of the spondylolisthesis with minimal motion evident on dynamic lateral x-ray films. The primary efficacy endpoint was the overall success rate, a composite measure derived from both radiographic and clinical parameters. The safety of OP-1 Putty was confirmed by comparing the nature and frequency of all adverse events and complications that were prospectively observed in either of the groups. METHODS: Thirty-six patients with degenerative spondylolisthesis and symptoms of neurogenic claudication underwent decompressive laminectomy and single-level uninstrumented fusion with either OP-1 Putty or autograft. All patients were evaluated at 6 weeks and 3, 6, 9, 12, and 24 months, after which time they were instructed to return on a yearly basis. Multiple neuroradiologists blinded to the assigned treatment reviewed static and dynamic X-ray films with digital calipers to assess fusion status according to the presence of continuous bridging bone across the transverse processes as well as the amount of residual motion evident at the level of interest. Oswestry Disability Index surveys and SF-36 questionnaires were used to assess clinical outcomes. RESULTS: At the 48-month time point, complete radiographic and clinical data were available for 22 of 36 patients (16 OP-1 Putty and 6 autograft) and 25 of 36 patients (18 OP-1 Putty and 7 autograft), respectively. Radiographic evidence of a solid arthrodesis was present in 11 of 16 OP-1 Putty patients (68.8%) and 3 of 6 autograft patients (50%). Clinically successful outcomes defined as at least a 20% improvement in preoperative Oswestry scores were experienced by 14 of 19 OP-1 Putty patients (73.7%) and 4 of 7 autograft patients (57.1%); these clinical findings were corroborated by similar increases in SF-36 scores. The respective overall success rates of the OP-1 Putty and autograf
Descriptors
Adult, Aged, Aged, 80 and over, Bone Morphogenetic Proteins/therapeutic use, Female, Follow-Up Studies, Humans, Ilium/transplantation, Lumbosacral Region, Male, Middle Aged, Pilot Projects, Postoperative Complications, Spinal Fusion/methods, Spinal Stenosis/surgery, Spondylolisthesis/surgery, Transplantation, Autologous, Treatment Outcome
Links
Book Title
Database
Publisher
Data Source
Authors
Vaccaro,A. R., Whang,P. G., Patel,T., Phillips,F. M., Anderson,D. G., Albert,T. J., Hilibrand,A. S., Brower,R. S., Kurd,M. F., Appannagari,A., Patel,M., Fischgrund,J. S.
Original/Translated Title
URL
Date of Electronic
20070525
PMCID
Editors