Skip to main content
Title Pub Year Author Sort ascending SearchLink
Bond strengths of porcelain laminate veneers to tooth surfaces prepared with acid and Er,Cr:YSGG laser etching 2003 Department of Prosthodontics, Selcuk University, Konya, Turkey. asli_u@hotmail.com
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The Journal of prosthetic dentistry
Periodical, Abbrev.
J.Prosthet.Dent.
Pub Date Free Form
Jul
Volume
90
Issue
1
Start Page
24
Other Pages
30
Notes
LR: 20121115; JID: 0376364; 0 (Aluminum Silicates); 0 (IPS-Empress ceramic); 0 (Maleates); 0 (Phosphoric Acids); 0 (Resin Cements); 12001-21-7 (Dental Porcelain); 179240-22-3 (Variolink); 91XW058U2C (maleic acid); ppublish
Place of Publication
United States
ISSN/ISBN
0022-3913; 0022-3913
Accession Number
PMID: 12869971
Language
eng
SubFile
Journal Article; D; IM
DOI
10.1016/S002239130300235X [doi]
Output Language
Unknown(0)
PMID
12869971
Abstract
STATEMENT OF PROBLEM: The erbium, chromium: yttrium, scandium, gallium, garnet (Er,Cr:YSGG) hydrokinetic laser system has been successful in the ablation of dental tissues. It has been reported that this system is also useful for preparing tooth surfaces for adhesion, but results to date have been controversial. PURPOSE: This in vitro study evaluated the bond strengths of porcelain laminate veneers to tooth surfaces after etching with acid and Er,Cr:YSGG laser conditioning. Material and method Forty extracted caries- and restoration-free human maxillary central incisors were used. The teeth were sectioned 2 mm below the cementoenamel junction. The crowns were embedded in autopolymerizing acrylic resin with the labial surfaces facing up. The labial surfaces were prepared with.05 mm reduction to receive porcelain veneers. The teeth were divided into 4 groups of 10 specimens. Thirty specimens received 1 of the following surface treatments before the bonding of IPS Empress 2 laminate veneers: (1) laser radiation from an Er,Cr:YSGG laser unit; (2) 37% orthophosphoric acid; and (3) 10% maleic acid. Ten specimens received no surface treatment and served as the control group. The veneers were bonded with dual-polymerizing resin, Variolink II. One microtensile specimen from each of the cervical and incisal thirds measuring 1.2 x 1.2 mm was prepared with a slow-speed diamond saw sectioning machine with a diamond-rim blade. These specimens were attached to opposing arms of the microtensile testing device with cyanoacrylate adhesive and fractured under tension at a crosshead speed of 1 mm/min, and the maximum load at fracture (Kg) was recorded. The data were analyzed with a 2-way analysis of variance and Tukey HSD tests (alpha=.05). RESULTS: No statistically significant differences were found among the bond strengths of veneers bonded to tooth surfaces etched with Er,Cr:YSGG laser (12.1 +/- 4.4 MPa), 37% orthophosphoric acid (13 +/- 6.5 MPa), and 10% maleic acid (10.6 +/- 5.6 MPa). The control group demonstrated the lowest bond strength values in all test groups. Statistically significant differences were found between the bond strengths of cervical and incisal sections (P<.001). CONCLUSION: In vitro microtensile bond strengths of porcelain laminate veneers bonded to tooth surfaces that were laser-etched showed results similar to orthophosphoric acid or maleic acid etched tooth surfaces.
Descriptors
Acid Etching, Dental, Aluminum Silicates/chemistry, Analysis of Variance, Dental Bonding, Dental Enamel/ultrastructure, Dental Porcelain/chemistry, Dental Veneers, Humans, Lasers, Maleates/chemistry, Materials Testing, Microscopy, Electron, Scanning, Phosphoric Acids/chemistry, Resin Cements/chemistry, Stress, Mechanical, Surface Properties, Tensile Strength, Tooth Preparation/methods
Links
Book Title
Database
Publisher
Data Source
Authors
Usumez,A., Aykent,F.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Shear bond strength of resin cement to an acid etched and a laser irradiated ceramic surface 2013 Department of Prosthodontics, Faculty of Dentistry, Yeditepe University, Istanbul, Turkey.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The journal of advanced prosthodontics
Periodical, Abbrev.
J.Adv.Prosthodont.
Pub Date Free Form
May
Volume
5
Issue
2
Start Page
98
Other Pages
103
Notes
LR: 20130613; JID: 101521064; OID: NLM: PMC3675300; OTO: NOTNLM; 2012/10/02 [received]; 2013/02/14 [revised]; 2013/04/25 [accepted]; 2013/05/30 [epublish]; ppublish
Place of Publication
Korea (South)
ISSN/ISBN
2005-7806; 2005-7806
Accession Number
PMID: 23755333
Language
eng
SubFile
Journal Article
DOI
10.4047/jap.2013.5.2.98 [doi]
Output Language
Unknown(0)
PMID
23755333
Abstract
PURPOSE: To evaluate the effects of hydrofluoric acid etching and Er,Cr:YSGG laser irradiation on the shear bond strength of resin cement to lithium disilicate ceramic. MATERIALS AND METHODS: Fifty-five ceramic blocks (5 mm x 5 mm x 2 mm) were fabricated and embedded in acrylic resin. Their surfaces were finished with 1000-grit silicon carbide paper. The blocks were assigned to five groups: 1) 9.5% hydrofluoric-acid etching for 60 s; 2-4), 1.5-, 2.5-, and 6-W Er,Cr:YSGG laser applications for 60 seconds, respectively; and 5) no treatment (control). One specimen from each group was examined using scanning electron microscopy. Ceramic primer (Rely X ceramic primer) and adhesive (Adper Single Bond) were applied to the ceramic surfaces, followed by resin cement to bond the composite cylinders, and light curing. Bonded specimens were stored in distilled water at 37 for 24 hours. Shear bond strengths were determined by a universal testing machine at 1 mm/min crosshead speed. Data were analyzed using Kruskal-Wallis and Mann-Whitney U-tests (alpha=0.05). RESULTS: Adhesion was significantly stronger in Group 2 (3.88 +/- 1.94 MPa) and Group 3 (3.65 +/- 1.87 MPa) than in Control group (1.95 +/- 1.06 MPa), in which bonding values were lowest (P<.01 no="" significant="" difference="" was="" observed="" between="" group="" mpa="" and="" control="" group.="" shear="" bond="" strength="" highest="" in="" p="" conclusion:="" er="" laser="" irradiation="" at="" w="" increased="" strengths="" ceramic="" resin="" cement="" compared="" with="" untreated="" surfaces.="" may="" not="" be="" an="" efficient="" surface="" treatment="" technique.="">
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Kursoglu,P., Motro,P.F., Yurdaguven,H.
Original/Translated Title
URL
Date of Electronic
20130530
PMCID
PMC3675300
Editors
Effect of acid etching time and a self-etching adhesive on the shear bond strength of composite resin to porcelain 2006 Department of Prosthodontics, Faculty of Dentistry, Ondokuz Mayis University, Samsun, Turkey. auguler@omu.edu.tr
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The journal of adhesive dentistry
Periodical, Abbrev.
J.Adhes.Dent.
Pub Date Free Form
Feb
Volume
8
Issue
1
Start Page
21
Other Pages
25
Notes
JID: 100888552; 0 (Acrylic Resins); 0 (Adhesives); 0 (Composite Dental Resin); 0 (Composite Resins); 0 (Dentin-Bonding Agents); 0 (Polyurethanes); 12001-21-7 (Dental Porcelain); ppublish
Place of Publication
England
ISSN/ISBN
1461-5185; 1461-5185
Accession Number
PMID: 16536340
Language
eng
SubFile
Journal Article; D
DOI
Output Language
Unknown(0)
PMID
16536340
Abstract
PURPOSE The purpose of this study was to evaluate the effect of different acid etching times with 9.6% hydrofluoric acid gel and two adhesive systems on shear bond strengths of resin composite to porcelain. MATERIALS AND METHODS: Ninety-eight 7 x 7 x 2 mm feldspathic porcelain blocks (VMK 95, Vita) were prepared. The specimens were divided into 7 groups: 1 control (no surface treatment) and 6 groups acid etched with 9.6% hydrofluoric acid gel for different etching times, including 30 s, 30+30 s, 60 s, 60+60 s, 120 s, and 180 s. Each of the etching time groups was divided into two bonding agent (Single Bond, AdheSE) subgroups (n = 7). Microhybrid composite (Filtek Z250) was condensed using a teflon mold and light polymerized for 20 s on the porcelain specimens. The prepared specimens were then stored in distilled water at 37 degrees C for 24 h before mechanical testing. Shear testing of all groups was performed on a universal testing machine (Lloyd LRX) at a crosshead speed of 0.5 mm/min. The bond strength data were analyzed with two-way ANOVA. The means were compared using the Tukey HSD test (alpha = 0.05). RESULTS: Acid etching time and bonding agent statistically significantly influenced bond strength (p < 0.05). In the Single Bond group, the bond strengths between group 0 (10.48 MPa) and Group 30 (11.17 MPa) did not differ significantly, with these groups exhibiting the lowest bond strength values. The highest bond strength in Single Bond group was observed in group 120 (15.07 MPa) and group 60+60 (15.42 MPa), which did not differ significantly from each other. In the AdheSE group, the bond strengths of group 0 (9.33 MPa) and group 30 (9.49 MPa) did not differ significantly, and these groups exhibited the lowest bond strength values. The highest bond strengths in the AdheSE subgroup were observed in group 120 (14.84 MPa) and group 60+60 (14.96 MPa), which were not significantly different. Comparing the two different adhesive systems, Single Bond exhibited higher bond strength values than did the self-etching adhesive AdheSE. CONCLUSIONS: Acid etching of porcelain with 9.6% hydrofluoric acid gel for 120 s provided adequate bond strength for composite repair with a microhybrid composite. When a porcelain restoration is repaired with composite, Single Bond adhesive should be preferred to the AdheSE self-etching adhesive system.
Descriptors
Acid Etching, Dental/methods, Acrylic Resins/chemistry, Adhesives/chemistry, Composite Resins/chemistry, Dental Porcelain/chemistry, Dentin-Bonding Agents/chemistry, Materials Testing, Polyurethanes/chemistry, Shear Strength, Time Factors
Links
Book Title
Database
Publisher
Data Source
Authors
Guler,A. U., Yilmaz,F., Yenisey,M., Guler,E., Ural,C.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
The effect of home-bleaching application on the color and translucency of five resin composites 2013 Department of Prosthodontics, Faculty of Dentistry, Near East University, Mersin10, Turkey. Electronic address: sevcankurtulmusyilmaz@gmail.com.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Journal of dentistry
Periodical, Abbrev.
J.Dent.
Pub Date Free Form
Nov
Volume
41 Suppl 5
Issue
Start Page
e70
Other Pages
5
Notes
CI: Copyright (c) 2013; JID: 0354422; 0 (CeramX); 0 (Composite Resins); 0 (Dental Materials); 0 (Gradia); 0 (Grandio); 0 (Methacrylates); 0 (Organically Modified Ceramics); 0 (Peroxides); 0 (Tooth Bleaching Agents); 0 (clearfil majesty); 059QF0KO0R (Water
Place of Publication
England
ISSN/ISBN
1879-176X; 0300-5712
Accession Number
PMID: 23313829
Language
eng
SubFile
Journal Article; D; IM
DOI
10.1016/j.jdent.2012.12.007 [doi]
Output Language
Unknown(0)
PMID
23313829
Abstract
OBJECTIVES: The aim of this study was to investigate the effect of home bleaching agents on the color and translucency of resin composites. METHODS: Thirty disc shaped specimens (1mm thick) were fabricated from each resin composite (Reflexions, Grandio, Gradia Direct, Clearfil Majesty Esthetic, Ceram-X Mono) and divided into 3 subgroups as carbamide peroxide (CP, Opalescence 10% PF), hydrogen peroxide (HP, 10% Opalescence Treswhite Supreme) and control group (n=10). Baseline CIE L*a*b* color coordinates were measured with spectrophotometer and translucency parameters (TP) were calculated. CP and HP groups were treated with bleaching agents according to manufacturers' instructions and control group was stored in distilled water (DW) for 14 days. Color and translucency measurements were repeated and color differences were calculated, DeltaE values>3.3 were considered as clinically unacceptable. RESULTS: Clinically unacceptable color change was detected for all resin composites exposed to bleaching agents and there was significant color difference between the control group and bleached specimens (P
Descriptors
Links
Book Title
Database
Publisher
Elsevier Ltd
Data Source
Authors
Kurtulmus-Yilmaz,S., Cengiz,E., Ulusoy,N., Ozak,S.T., Yuksel,E.
Original/Translated Title
URL
Date of Electronic
20130109
PMCID
Editors
Effect of different bonding agents on shear bond strengths of composite-bonded porcelain to enamel 2003 Department of Prosthodontics, Faculty of Dentistry, Ege University, Izmir, Turkey. cenkcura@hotmail.com
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The Journal of prosthetic dentistry
Periodical, Abbrev.
J.Prosthet.Dent.
Pub Date Free Form
Apr
Volume
89
Issue
4
Start Page
394
Other Pages
399
Notes
LR: 20131121; JID: 0376364; 0 (Acrylates); 0 (Aluminum Silicates); 0 (Clearfil SE Bond); 0 (Composite Resins); 0 (Dentin-Bonding Agents); 0 (IPS-Empress ceramic); 0 (PermaQuik); 0 (Polymethacrylic Acids); 0 (Prime and Bond NT); 0 (Prompt L-Pop); 0 (Resin
Place of Publication
United States
ISSN/ISBN
0022-3913; 0022-3913
Accession Number
PMID: 12690353
Language
eng
SubFile
Clinical Trial; Journal Article; D; IM
DOI
10.1067/mpr.2003.58 [doi]
Output Language
Unknown(0)
PMID
12690353
Abstract
STATEMENT OF PROBLEM: The use of bonding agents in the luting procedure for porcelain laminate restorations to enamel is not clear. PURPOSE: This study evaluated the shear bond strength differences between an enamel-luting composite and a heat-pressed ceramic with 6 different bonding systems. MATERIAL AND METHODS: Seventy standardized heat-pressed IPS Empress ceramic discs (4-mm diameter, 3-mm height) were prepared. A vertical planar enamel-bonding surface was prepared on the buccal or lingual enamel of 70 freshly extracted sound human molars and premolars. The teeth were oriented to maintain a parallel relationship between the bonding plane and the shear loading axis of a universal testing machine. Tooth specimens were divided into 7 groups (n=10) comprising equal numbers of molars and premolars. The enamel surfaces of specimens in groups 1 through 6 were prepared with 1 of 6 bonding agents (Scotchbond Multi Purpose Plus, Heliobond, PQ1, SE Bond, Prime&Bond NT, and Prompt L-Pop). Finally, the specimens were luted to the ceramic discs with the composite cement (Opal Luting Composite). Ceramic discs in the seventh group (Control) were luted to the etched enamel with the composite cement without using bonding material. Enamel-ceramic specimens were kept in distilled water at room temperature for 30 days after cementation. All specimens were shear loaded axially in a universal testing machine with a crosshead speed of 0.05 mm/min until fracture. Shear bond strength was measured and recorded for each group in MPa. To determine the statistical significance of the differences between the mean shear bond strength values, a 1-way analysis of variance was used (alpha=.05). Post-hoc multiple comparisons were made with Duncan's multiple range analysis. Fractured surfaces of each specimen were also inspected with a stereomicroscope to evaluate failure modes. RESULTS: A 1-way analysis of variance revealed significant differences between the test groups (P=.00). Bond strength values (MPa) from the highest to the lowest were as follows: Prompt L-Pop, 25.46 +/- 5.6; Prime&Bond NT, 18.99 +/- 4.93; Heliobond, 17.28 +/- 4.0; SE Bond, 16.21 +/- 2.6; PQ1, 15.60 +/- 2.8; Scotchbond MPP, 14.82 +/- 2.4; and Control, 10.55 +/- 1.6. Duncan's multiple range post hoc analysis exhibited significant differences between the control group and the adhesive bonding agent groups (P<.05). There were also significant differences between the bonding agent groups (P<.05). Prompt L-Pop showed the highest bond strength values. CONCLUSION: Within the limitations of this study, bonding agents appear to have a strengthening effect on the shear bond strengths of the enamel/composite/porcelain interface of the materials tested. Bonding agents used in this study showed similar bond strength values except for Prompt L-Pop, which demonstrated the highest bond strength values.
Descriptors
Acrylates/chemistry, Adhesiveness, Adult, Aluminum Silicates/chemistry, Analysis of Variance, Composite Resins/chemistry, Dental Bonding, Dental Enamel/ultrastructure, Dental Porcelain/chemistry, Dentin-Bonding Agents/chemistry, Humans, Materials Testing, Middle Aged, Polymethacrylic Acids/chemistry, Resin Cements/chemistry, Statistics as Topic, Stress, Mechanical, Temperature, Time Factors, Water/chemistry
Links
Book Title
Database
Publisher
Data Source
Authors
Cura,C., Saracoglu,A., Cotert,H. S.
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Comparative evaluation of surface topography of tooth prepared using erbium, chromium: Yttrium, scandium, gallium, garnet laser and bur and its clinical implications 2015 Department of Prosthodontics, Crown and Bridge, Maulana Azad Institute of Dental Sciences, New Delhi, India.; Department of Prosthodontics, Crown and Bridge, Maulana Azad Institute of Dental Sciences, New Delhi, India.; Department of Prosthodontics, Crown
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Journal of Indian Prosthodontic Society
Periodical, Abbrev.
J.Indian.Prosthodont.Soc.
Pub Date Free Form
Jan-Mar
Volume
15
Issue
1
Start Page
23
Other Pages
28
Notes
LR: 20160308; JID: 101255941; OID: NLM: PMC4762284; OTO: NOTNLM; ppublish
Place of Publication
India
ISSN/ISBN
0972-4052; 0972-4052
Accession Number
PMID: 26929482
Language
eng
SubFile
Journal Article
DOI
10.4103/0972-4052.155042 [doi]
Output Language
Unknown(0)
PMID
26929482
Abstract
BACKGROUND: Erbium, chromium: Yttrium, scandium, gallium, garnet (Er, Cr: YSGG) laser has been successfully used in the ablation of dental hard and soft tissues. It has been reported that this system is also useful for preparing tooth surfaces and etching, but no consensus exist in the literature regarding the advantage of lasers over conventional tooth preparation technique. MATERIALS AND METHODS: Labial surfaces of 25 extracted human maxillary central incisors were divided into two halves. Right half was prepared with diamond bur and left half with Er, Cr; YSGG laser and a reduction of 0.3-0.5 mm was carried out. Topography of prepared surfaces of five teeth were examined under scanning electron microscope (SEM). The remaining samples were divided into 4 groups of 10 specimens each based on the surface treatment received: One group was acid etched and other was nonetched. Composite resin cylinders were bonded on prepared surfaces and shear bond strength was assessed using a universal testing machine. RESULTS: The SEM observation revealed that the laser prepared surfaces were clean, highly irregular and devoid of a smear layer. Bur prepared surfaces were relatively smooth but covered with smear layer. Highest bond strength was shown by laser prepared acid etched group, followed by bur prepared the acid etched group. The bur prepared nonacid etched group showed least bond strength. CONCLUSIONS: Er, Cr: YSGG laser can be used for preparing tooth and bond strength value achieved by laser preparation alone without surface treatment procedure lies in the range of clinical acceptability.
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Verma,M., Kumari,P., Gupta,R., Gill,S., Gupta,A.
Original/Translated Title
URL
Date of Electronic
PMCID
PMC4762284
Editors
One stage, full-mouth, ultrasonic debridement in the treatment of severe chronic periodontitis in smokers: a preliminary, blind and randomized clinical trial 2013 Department of Prosthodontics and Periodontics, Piracicaba Dental School, State University of Campinas, Piracicaba, Brazil.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Journal of the International Academy of Periodontology
Periodical, Abbrev.
J.Int.Acad.Periodontol.
Pub Date Free Form
Jul
Volume
15
Issue
3
Start Page
83
Other Pages
90
Notes
JID: 100888553; ppublish
Place of Publication
England
ISSN/ISBN
1466-2094; 1466-2094
Accession Number
PMID: 24079100
Language
eng
SubFile
Comparative Study; Journal Article; Randomized Controlled Trial; Research Support, Non-U.S. Gov't; D
DOI
Output Language
Unknown(0)
PMID
24079100
Abstract
OBJECTIVE: The aim of this clinical trial was to assess the performance of a full-mouth ultrasonic debridement protocol in the treatment of severe chronic periodontitis in comparison with scaling and root planing in a quadrant-wise procedure in smokers. MATERIALS AND METHODS: The trial consisted of 30 participants presenting with periodontitis divided into 3 groups: Group FMUD - full-mouth ultrasonic debridement, i.e., one session of 45 minutes of ultrasonic instrumentation for smokers (n = 10), Group SRP- scaling and root planing performed in a quadrant-wise manner for smokers (n = 10), and Group Control - SRP for nonsmokers (n = 10), treated following the same protocol as the SRP group. The parameters evaluated were: plaque/bleeding on probing indices, probing pocket depth, relative recession, and relative probing attachment level at baseline, 45, 90 and 180 days after therapy. RESULTS: Full-mouth ultrasonic debridement and scaling and root planing resulted in comparable gain of attachment 6 months after therapy. Both groups exhibited probing pocket depth reduction at all experimental periods as compared to baseline. Smokers, however, had less probing pocket depth reduction and relative probing attachment level gain compared to non-smokers, despite the mechanical protocol used (p 5 mm and bleeding on probing) than smokers (p
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Meulman,T., Giorgetti,A.P., Gimenes,J., Casarin,R.C., Peruzzo,D.C., Nociti,F.H.,Jr
Original/Translated Title
URL
Date of Electronic
PMCID
Editors
Transmission dynamics and control of Ebola virus disease outbreak in Nigeria, July to September 2014 2014 Department of Production Animal Studies, University of Pretoria, South Africa.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
Euro surveillance : bulletin Europeen sur les maladies transmissibles = European communicable disease bulletin
Periodical, Abbrev.
Euro Surveill.
Pub Date Free Form
9-Oct
Volume
19
Issue
40
Start Page
20920
Other Pages
Notes
LR: 20160115; GR: 1318788/Biotechnology and Biological Sciences Research Council/United Kingdom; GR: BB/M008894/1/Biotechnology and Biological Sciences Research Council/United Kingdom; JID: 100887452; CIN: Euro Surveill. 2015;20(17). pii: 21106. PMID: 259
Place of Publication
Sweden
ISSN/ISBN
1560-7917; 1025-496X
Accession Number
PMID: 25323076
Language
eng
SubFile
Journal Article; Research Support, N.I.H., Extramural; Research Support, Non-U.S. Gov't; Research Support, U.S. Gov't, Non-P.H.S.; IM
DOI
20920 [pii]
Output Language
Unknown(0)
PMID
25323076
Abstract
We analyse up-to-date epidemiological data of the Ebola virus disease outbreak in Nigeria as of 1 October 2014 in order to estimate the case fatality rate, the proportion of healthcare workers infected and the transmission tree. We also model the impact of control interventions on the size of the epidemic. Results indicate that Nigeria's quick and forceful implementation of control interventions was determinant in controlling the outbreak rapidly and avoiding a far worse scenario in this country.
Descriptors
Links
Book Title
Database
Publisher
Data Source
Authors
Fasina,F.O., Shittu,A., Lazarus,D., Tomori,O., Simonsen,L., Viboud,C., Chowell,G.
Original/Translated Title
URL
Date of Electronic
20141009
PMCID
Editors
Nicotine receptor partial agonists for smoking cessation 2008 Department of Primary Health Care, University of Oxford, Rosemary Rue Building, Old Road Campus, Oxford, UK, OX3 7LF. kate.cahill@dphpc.ox.ac.uk
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The Cochrane database of systematic reviews
Periodical, Abbrev.
Cochrane Database Syst.Rev.
Pub Date Free Form
16-Jul
Volume
(3):CD006103. doi
Issue
3
Start Page
CD006103
Other Pages
Notes
LR: 20151119; JID: 100909747; 0 (Alkaloids); 0 (Azocines); 0 (Benzazepines); 0 (Nicotinic Agonists); 0 (Quinolizines); 0 (Quinoxalines); 01ZG3TPX31 (Bupropion); 53S5U404NU (cytisine); 6M3C89ZY6R (Nicotine); W6HS99O8ZO (Varenicline); UIN: Cochrane Database
Place of Publication
England
ISSN/ISBN
1469-493X; 1361-6137
Accession Number
PMID: 18646137
Language
eng
SubFile
Journal Article; Meta-Analysis; Review; IM
DOI
10.1002/14651858.CD006103.pub3 [doi]
Output Language
Unknown(0)
PMID
18646137
Abstract
BACKGROUND: Nicotine receptor partial agonists may help people to stop smoking by a combination of maintaining moderate levels of dopamine to counteract withdrawal symptoms (acting as an agonist) and reducing smoking satisfaction (acting as an antagonist). Varenicline was developed as a nicotine receptor partial agonist from cytisine, a drug widely used in central and eastern Europe for smoking cessation. The first trial reports of varenicline were released in 2006, and further trials have now been published or are currently are underway. OBJECTIVES: The primary objective of this review is to assess the efficacy and tolerability of nicotine receptor partial agonists, including varenicline and cytisine, for smoking cessation. SEARCH STRATEGY: We searched the Cochrane Tobacco Addiction Group's specialised register for trials, using the terms ('varenicline' or 'cytisine' or 'Tabex' or 'nicotine receptor partial agonist') and 'smoking' in the title or abstract, or as keywords. We also searched MEDLINE, EMBASE, PsycINFO and CINAHL using MeSH terms and free text, and we contacted authors of trial reports for additional information where necessary. The latest search was in March 2008. SELECTION CRITERIA: We included randomized controlled trials which compared the treatment drug with placebo. We also included comparisons with bupropion and nicotine patches where available. We excluded trials which did not report a minimum follow-up period of six months from start of treatment. DATA COLLECTION AND ANALYSIS: We extracted data in duplicate on the type of participants, the dose and duration of treatment, the outcome measures, the randomization procedure, concealment of allocation, and completeness of follow up. The main outcome measured was abstinence from smoking after at least six months from the beginning of treatment. We used the most rigorous definition of abstinence, and preferred biochemically validated rates where they were reported. Where appropriate we performed meta-analysis to produce a risk ratio, using the Mantel-Haenszel fixed-effect model. MAIN RESULTS: We found seven trials of varenicline compared with placebo for smoking cessation; three of these also included a bupropion experimental arm. We found one relapse prevention trial, comparing varenicline with placebo. We also found one open-label trial comparing varenicline with nicotine replacement therapy. The nine trials covered 7267 participants, 4744 of whom used varenicline. We identified one trial of cytisine (Tabex) for inclusion. The pooled risk ratio (RR) for continuous abstinence at six months or longer for varenicline versus placebo was 2.33 (95% confidence interval [CI] 1.95 to 2.80). The pooled RR for varenicline versus bupropion at one year was 1.52 (95% CI 1.22 to 1.88). The RR for varenicline versus NRT at one year was 1.31 (95% CI 1.01 to 1.71). The two trials which tested the use of varenicline beyond the 12-week standard regimen found the drug to be well-tolerated during long-term use. The main adverse effect of varenicline was nausea, which was mostly at mild to moderate levels and usually subsided over time. Post-marketing safety data suggest that varenicline may be associated with depressed mood, agitation, and suicidal behaviour or ideation. The labelling of varenicline has been amended, and the FDA is conducting a safety review. The one cytisine trial included in this review found that more participants taking cytisine stopped smoking compared with placebo at two-year follow up, with an RR of 1.61 (95% CI 1.24 to 2.08). AUTHORS' CONCLUSIONS: Varenicline increased the chances of successful long-term smoking cessation between two- and threefold compared with pharmacologically unassisted quit attempts. More participants quit successfully with varenicline than with bupropion. One open-label trial of varenicline versus nicotine replacement therapy demonstrated a modest benefit of varenicline. The effectivenes
Descriptors
Alkaloids/therapeutic use, Azocines/therapeutic use, Benzazepines/adverse effects/therapeutic use, Bupropion/therapeutic use, Humans, Nicotine/antagonists & inhibitors, Nicotinic Agonists/adverse effects/therapeutic use, Quinolizines/therapeutic use, Quinoxalines/adverse effects/therapeutic use, Randomized Controlled Trials as Topic, Smoking/drug therapy, Smoking Cessation/methods, Varenicline
Links
Book Title
Database
Publisher
Data Source
Authors
Cahill,K., Stead,L. F., Lancaster,T.
Original/Translated Title
URL
Date of Electronic
20080716
PMCID
Editors
Nicotine receptor partial agonists for smoking cessation 2010 Department of Primary Health Care, University of Oxford, Rosemary Rue Building, Old Road Campus, Oxford, UK, OX3 7LF.
Source Type
Print(0)
Ref Type
Journal Article
Periodical, Full
The Cochrane database of systematic reviews
Periodical, Abbrev.
Cochrane Database Syst.Rev.
Pub Date Free Form
8-Dec
Volume
(12):CD006103. doi
Issue
12
Start Page
CD006103
Other Pages
Notes
LR: 20151119; JID: 100909747; 0 (Alkaloids); 0 (Azocines); 0 (Benzazepines); 0 (Nicotinic Agonists); 0 (Quinolizines); 0 (Quinoxalines); 01ZG3TPX31 (Bupropion); 53S5U404NU (cytisine); 6M3C89ZY6R (Nicotine); W6HS99O8ZO (Varenicline); CIN: Evid Based Med. 2
Place of Publication
England
ISSN/ISBN
1469-493X; 1361-6137
Accession Number
PMID: 21154363
Language
eng
SubFile
Journal Article; Meta-Analysis; Review; IM
DOI
10.1002/14651858.CD006103.pub4 [doi]
Output Language
Unknown(0)
PMID
21154363
Abstract
BACKGROUND: Nicotine receptor partial agonists may help people to stop smoking by a combination of maintaining moderate levels of dopamine to counteract withdrawal symptoms (acting as an agonist) and reducing smoking satisfaction (acting as an antagonist). Varenicline was developed as a nicotine receptor partial agonist from cytisine, a drug widely used in central and eastern Europe for smoking cessation. The first trial reports of varenicline were released in 2006, and further trials have now been published or are currently underway. OBJECTIVES: The primary objective of this review is to assess the efficacy and tolerability of nicotine receptor partial agonists, including varenicline and cytisine, for smoking cessation. SEARCH STRATEGY: We searched the Cochrane Tobacco Addiction Group's specialised register for trials, using the terms ('varenicline' or 'cytisine' or 'Tabex' or 'nicotine receptor partial agonist') and 'smoking' in the title or abstract, or as keywords. We also searched MEDLINE, EMBASE, PsycINFO and CINAHL using MeSH terms and free text, and we contacted authors of trial reports for additional information where necessary. The latest search was in September 2010. SELECTION CRITERIA: We included randomized controlled trials which compared the treatment drug with placebo. We also included comparisons with bupropion and nicotine patches where available. We excluded trials which did not report a minimum follow-up period of six months from start of treatment. DATA COLLECTION AND ANALYSIS: We extracted data on the type of participants, the dose and duration of treatment, the outcome measures, the randomization procedure, concealment of allocation, and completeness of follow up.The main outcome measured was abstinence from smoking after at least six months from the beginning of treatment. We used the most rigorous definition of abstinence, and preferred biochemically validated rates where they were reported. Where appropriate we performed meta-analysis to produce a risk ratio, using the Mantel-Haenszel fixed-effect model. MAIN RESULTS: We found 11 trials of varenicline compared with placebo for smoking cessation; three of these included a bupropion experimental arm. We also found one relapse prevention trial, comparing varenicline with placebo, and two open-label trials comparing varenicline with nicotine replacement therapy (NRT). We also include one trial in which all the participants were given varenicline, but received behavioural support either online or by phone calls, or by both methods. This trial is not included in the analyses, but contributes to the data on safety and tolerability. The included studies covered >10,300 participants, 6892 of whom used varenicline. We identified one trial of cytisine (Tabex) for inclusion.The pooled risk ratio (RR) (10 trials, 4443 people, excluding one trial evaluating long term safety) for continuous abstinence at six months or longer for varenicline at standard dosage versus placebo was 2.31 (95% confidence interval [CI] 2.01 to 2.66). Varenicline at lower or variable doses was also shown to be effective, with an RR of 2.09 (95% CI 1.56 to 2.78; 4 trials, 1272 people). The pooled RR for varenicline versus bupropion at one year was 1.52 (95% CI 1.22 to 1.88; 3 trials, 1622 people). The RR for varenicline versus NRT for point prevalence abstinence at 24 weeks was 1.13 (95% CI 0.94 to 1.35; 2 trials, 778 people). The two trials which tested the use of varenicline beyond the 12-week standard regimen found the drug to be well-tolerated during long-term use. The main adverse effect of varenicline was nausea, which was mostly at mild to moderate levels and usually subsided over time. Post-marketing safety data raised questions about a possible association between varenicline and depressed mood, agitation, and suicidal behaviour or ideation. The labelling of varenicline was amended in 2008, and the manufacturers produced a Medication Gu
Descriptors
Alkaloids/therapeutic use, Azocines/therapeutic use, Benzazepines/adverse effects/therapeutic use, Bupropion/therapeutic use, Humans, Nicotine/adverse effects/antagonists & inhibitors, Nicotinic Agonists/adverse effects/therapeutic use, Quinolizines/therapeutic use, Quinoxalines/adverse effects/therapeutic use, Randomized Controlled Trials as Topic, Smoking/drug therapy, Smoking Cessation/methods, Substance Withdrawal Syndrome/prevention & control, Varenicline
Links
Book Title
Database
Publisher
Data Source
Authors
Cahill,K., Stead,L. F., Lancaster,T.
Original/Translated Title
URL
Date of Electronic
20101208
PMCID
Editors